This USB 2.0 to IDE / SATA drive adapter implements a bridge between a USB port and one SATA, ATA, or ATAPI-based mass storage device port.

This USB hard drive adapter could turn any standard IDE or SATA drive into a convenient external drive. Easily transfer files from a computer or notebook, back up files, or store large file archives on hard drives.

The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The ide to USB adapter supports all existing IDE/ATAPI devices such as a CD-ROM, CD-RW, DVD-ROM, and 2.5 and 3.5 IDE and SATA hard drives.

DEVICE INSTALLATION:

Hardware Install:

1. Confirm the device is under master mode.

2. Connect SATA/IDE connector to SATA/IDE device.

3. Connect AC power to SATA/IDE device.

4. Connect the cable to the USB port of the computer.

PRODUCT FEATURE:

• Connect to the IDE device using USB interface and SATA device too
• USB 2.0 standard, Full speed, 480M bps full speed
• Transfer rate up to 480MBps (USB 2.0 specification), limit depends on the IDE device/SATA device and the driver
• USB 1.1 device interface can be used, (Backward compatible with USB 1.1)
• Complies with ATA/ATAPI-66 Specification 1.0
• Easy to use and plug & play
• Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.)
•  External power adapter included, for power up the 12V IDE/ATAPI devices Usage